本文へ移動

400℃ press

Introduction to products

High-temperature PCB laminating vacuum press machine

  • Max. 410 °C can be attained by the thermal oil circulation method by using a unique heating and cooling unit.
  • Uses thermal oil that does not deteriorate even with long continuous use at high temperatures.
  • Unevenness of heating plate temperature is minimized and temperature at the time of cooling can be also controlled.
  • Products can be formed with stable quality for a long time by taking countermeasures for thermal conductivity and thermal strain with consideration for thermal insulation property.
Press capacity
59 to 1,960 kN
(6 to 200 tons)
Size of heating plate
750 × 750 × 40 mm
Daylight
80 mm
Number of openings
5 openings
Maximum operating temperature
410 °C
Heating method
Heating by thermal oil circulation
Reachable vacuum degree
1.3 kPa (10 torr)

Vacuum press machine for laminating thermoplastic resin sheets

  • Not only a press mechanism but also a preheater and transfer mechanism are compactly stored in the vacuum chamber [Patent pending].
  • A series of processes from preheating to press laminating can be performed under vacuum (pressure reduction) atmosphere.
Press capacity
49 to 1,180 kN
(5 to 120 tons)
Size of heating plate
550 × 550 mm
Number of openings
Single opening
Maximum operating temperature
400 °C
Heating method
Heating by electric heater
(Heating plate area)
Heating by far-infrared ray heater
(preheating area)
Reachable vacuum degree
2.6 kPa (20 torr)
TOPへ戻る