Products

Evaluation Tests

Evaluation Tests
  • Joint development of new resin materials and substrate forming processes
  • Development of new forming processes
Kitagawa Seiki's main test presses are available for use in developing and verifying all types of forming conditions (for forming of CCL, PCBs, IC cards, various types of resin, etc.).
3-Opening vacuum press
Press capacity 40~1,960kN(4~200ton)
Effective area 650×650mm
Daylight opening between heating plates 80 mm (max 240 mm, single opening)
Max. usable temperature 410℃
Heating method Thermal oil circulation with heater
Strength of vacuum attained 1.0kPa
List of main test presses
●Single opening vacuum press
 Press capacity:10~390kN(1~40ton)
 Effective area:200×200mm
 Daylight opening between heating plates:150mm
 Max. usable temperature:400℃
 Heating method:Heater
 Strength of vacuum attained:1.3kPa
Single opening vacuum press
 Press capacity:30~1,560kN(3~160ton)
 Effective area:400×400mm
 Daylight opening between heating plates:150mm
 Max. usable temperature:400℃
 Heating method:Heater
 Strength of vacuum attained:1.3kPa
●Single opening vacuum servo press
 Press capacity:1~80kN(0.1~8ton)
 Effective area:150×150mm
 Daylight opening between heating plates:100mm
 Max. usable temperature:400℃
 Heating method:Heater
 Strength of vacuum attained:1.0kPa
Single opening vacuum servo press
 Press capacity:2~255kN(0.2~26ton)
 Effective area:430×550mm
 Daylight opening between heating plates:100mm
 Max. usable temperature:230℃
 Heating method:Thermal oil circulation with heater
 Strength of vacuum attained:1.3kPa